X-ray structure and multinuclear NMR studies of platinum(II) and palladium(II) complexes with 5,7-ditertbutyl-1,2,4-triazolo[1,5-a]pyrimidine

Pt(II) and Pd(II) dichloride complexes with 5,7-ditertbutyl-1,2,4-triazolo[1,5-a]pyrimidine (dbtp) have been synthesized and characterized by infrared and ¹H, ¹³C NMR, ¹³C CPMAS spectroscopy. The structures of the cis-PtCl₂(dbtp)₂ · EtOH (1) and cis-PdCl₂(dbtp)(dmso) (2) has been determined by signal-crystal X-ray diffraction. In both complexes the X-ray crystal structures shows that heterocycle ligand (dbtp) binds the central atom monodentate via nitrogen atom N(3). In addition, compound (2) is interesting for its structural features, because it is the first report of mixed dichloride Pd(II) complexes with N-donor (triazolopyrimidine) and S-donor (dimethylsulfoxide) ligands. In this structure the Pd–Cl distances are: 2.302(1) and 2.281(1) Å, Pd–N 2.041(3) Å and Pd–S 2.245(1) Å. The ¹H, ¹³C NMR studies show clearly that these structures are retained in solution.     

Structural and spectroscopic trends in mononuclear arylchalcogenolato-palladium(II) and -platinum(II) complexes: Crystal structures of [M(TeAr)2(dppe)] {M = palladium, platinum; Ar = phenyl, 2-thienyl; dppe = 1,2-bis(diphenylphosphino)ethane}

A series of mononuclear [M(EAr)₂(dppe)] [M = Pd, Pt; E = Se, Te; Ar = phenyl, 2-thienyl; dppe = 1,2-bis(diphenylphosphino)ethane] complexes has been prepared in good yields by the reactions of [MCl₂(dppe)] and corresponding ArE⁻ with a special emphasis on the aryltellurolato palladium and -platinum complexes for which the existing structural information is virtually non-existent. The complexes have crystallized in five isomorphic groups: (1) [Pd(SePh)₂(dppe)] and [Pt(SePh)₂(dppe)], (2) [Pd(TePh)₂(dppe)] and [Pt(TePh)₂(dppe)], (3) [Pd(SeTh)₂(dppe)], (4) [Pt(SeTh)₂(dppe)] and [Pd(TeTh)₂(dppe)], and (5) [Pt(TePh)₂(dppe)]. In addition, solvated [Pd(TePh)₂(dppe)] · CH₃OH and [Pd(TeTh)₂(dppe)] · 1/2CH₂Cl₂ could be isolated and structurally characterized. The metal atom in each complex exhibits an approximate square-planar coordination. The Pd-Se, Pt-Se, Pd-Te, and Pt-Te bonds span a range of 2.4350(7)-2.4828(7) Å, 2.442(1)-2.511(1) Å, 2.5871(7)-2.6704(8) Å, and 2.6053(6)-2.6594(9) Å, respectively, and the respective Pd-P and Pt-P bond distances are 2.265(2)-2.295(2) Å and 2.247(2)-2.270(2) Å. The orientation of the arylchalcogenolato ligands with respect to the M(E₂)(P₂) plane has been found to depend on the E-M-E bond angle. The NMR spectroscopic information indicates the formation of only cis-[M(EAr)₂(dppe)] complexes in solution. The trends in the ³¹P, ⁷⁷Se, ¹²⁵Te, and ¹⁹⁵Pt chemical shifts expectedly depend on the nature of metal, chalcogen, and aryl group. Each trend can be considered independently of other factors. The ⁷⁷Se or ¹²⁵Te resonances appear as second-order multiplets in case of palladium and platinum complexes, respectively. Spectral simulation has yielded all relevant coupling constants.     

Synthesis and characterization of poly(amidoamine)-platinum(II) complexes. Detailed speciation by Matrix-Assisted Laser Desorption Ionization Mass Spectrometry

MALDI and ESI-MS have been applied to the characterization of the reaction products between the labile cis-[Pt(DMSO)₂Cl₂] (1) and trans-[Pt(DMSO)₂Cl(CH₃)] (2) complexes with the simplest poly(amidoamine) ligand (PAMAM, G = 0, 1,2-diaminoethane as core). The comparison of the mass spectra of the starting G₀ and those of the metallo-dendrimers formed upon mixing of the reagents in an equimolecular ratio, and the analysis of the isotopic distribution in the ESI spectra, have revealed the formation of cationic and neutral mononuclear complexes with PAMAM as ligand, e.g., cis-[Pt(DMSO)(PAMAM)Cl]Cl or trans-(C,N)[Pt(DMSO)(PAMAM)Cl(CH₃)], together with various minor components, which have been identified as derivatives from defective structures of PAMAM. The geometry of the main products has been deduced from the values of the protons coupling constants with the isotopically abundant ¹⁹⁵Pt. The metal-to-ligand bond is restricted to the peripheral amino groups of PAMAM which shows sufficient flexibility to involve either one or two branches in the coordination bonding.     

Simultaneous Determination of Platinum and Rhodium with Hydroxylamine and Acetone Oxime by Catalytic Adsorptive Stripping Voltammetry (CAdSV)

This paper describes a very sensitive catalytic adsorptive stripping voltammetry (CAdSV) procedure for the simultaneous determination of traces of platinum and rhodium in new supporting electrolyte containing hydroxylamine or acetone oxime and formaldehyde in sulfuric acid medium. Platinum and rhodium were pre‐accumulated simultaneously and after 120 s of accumulation time at 0.0 V, the achieved detection limits were equal 0.1 ng L^?1 and 0.2 ng L^?1 for platinum and rhodium respectively in the presence of acetone oxime and 0.6 ng L^?1 and 0.2 ng L^?1 for platinum and rhodium respectively in the presence of hydroxylamine. Described reagents were successfully applied to the determination of platinum and rhodium in plant material. Inductively coupled plasma mass spectrometry (ICP MS) was used as a reference method to the CAdSV measurements.     

Synthesis of New Reagent 2‐Acetylthiophenethiocynate and its Use in Extraction of Pt(IV) Spectrophotometrically

2‐Acetyl thiophenethiocynate (ATT) was synthesized and its characterization study was carried out using elemental analysis, IR and NMR techniques. The new reagent was proposed as an extractant for the development of the extractive spectrophotometric method for determination of Pt(IV) metal. The reagent complexes with the metal to produce a yellow colored complex which was then extracted into ethyl acetate at pH 11.2–11.6 having an absorption maxima at 400 nm. The thermal study showed that the extraction reactions are exothermic in nature with the reagent, and the stoichiometric ratio of Pt(IV) to 2‐acetyl thiophenethiocynate in the organic phase was 1:2. The method permits separation and determination of platinum from real and binary mixtures. The separation of Pt(IV) from bivalent metal ions has been also studied.     

乙醇在碳修饰的二氧化钛纳米管负载的钯电催化剂上的催化氧化

 通过有机物分解碳化处理TiO2 纳米管制得了TiO2C, 并以其为载体制备了Pd/TiO2C电催化剂,考察了该催化剂对碱性介质中乙醇电催化氧化的活性. 结果表明,碳化导电处理的TiO2C纳米管载体能有效改善催化剂中贵金属的分散度和电极结构,从而提高催化剂的电催化活性. 对催化剂活性组分的优化实验表明, Pd/TiO2C质量比为1/1时催化剂的活性最高. 在1 mol/L KOH溶液中Pd载量均为0.3 mg/cm2的条件下, Pd/TiO2C催化剂对乙醇氧化的催化活性是Pd/C催化剂的3.8倍.     

PtRu纳米线的合成及其在直接甲醇燃料电池阳极中的催化活性

 分别以SBA-15和MCM-41介孔分子筛作模板剂,采用浸渍还原法制备了纵横比及合金度不同的双组元PtRu纳米线和纳米棒电催化剂. 透射电镜、 X射线衍射表征和电化学测试结果表明, PtRu纳米线具有较高的合金度和较大的纵横比,在甲醇硫酸溶液中表现出更好的电催化活性. 初步探讨了PtRu纳米线催化剂的合金度和纵横比对其电催化活性和电极性能的影响.     

Ion-exchange method for separation and concentration of platinum and palladium for analysis of environmental samples by inductively coupled plasma atomic emission spectrometry

An ion-exchange procedure is proposed for determination of Pt and Pd in environmental samples, using a Dowex 1-X10 anion-exchange resin. Pt and Pd were separated from the matrix elements in the sample by selective retention on the column as anionic chloro complexes and subsequent elution by circulated thiourea at 60 °C. The eluent, containing Pt and Pd was analyzed by inductively coupled plasma (ICP) atomic emission spectrometry (AES). Average recoveries of 98% and detection limit of 15 ng/g for both metals were achieved. Analysis of Pt and Pd concentrations in road dust, sampled from several sites in Germany was performed. The comparison of the obtained data with the concentrations of Pt and Pd in the same samples, determined by ICP-MS showed a very good agreement.     

Pt-V2O5/HM催化剂积炭机理的TPO研究

Ｐｔ┐Ｖ２Ｏ５／ＨＭ催化剂积炭机理的ＴＰＯ研究蔡炳新（湖南大学化学化工系，长沙４１００１２）周烈华郑小明（杭州大学催化研究所，杭州３１００２８）关键词铂，五氧化二钒，氢型丝光沸石，程序升温氧化酸性载体Ｐｔ系贵金属双功能催化剂表面积炭是导致其催化性能衰...     

Determination of binding constants and stoichiometries for platinum anticancer drugs and serum transport proteins by capillary electrophoresis using the Hummel-Dreyer method

A CE method has been developed to evidence and quantitatively characterize the interaction between platinum-based antitumor drugs and human serum proteins. This method is a variant of affinity CE modified regarding both experimental setup and data treatment so as to measure the peaks (or vacancies) that correspond to the bound drug when it slowly binds to the protein. Using the formalism of the Hummel-Dreyer method and cisplatin and oxaliplatin as test compounds, a protocol for determining albumin and transferrin binding constants and stoichiometries, including (and distinguished by) 48 hours of incubation of the reaction mixture, was elaborated. Relative affinities of drugs toward different proteins in aqueous solution at physiological pH, chloride concentration, and temperature were compared in terms of overall binding constants and numbers of drug molecules attached to the protein. The results indicate that both platinum drugs bind to albumin more strongly than to transferrin, supporting the concept that the albumin fraction is a major drug supply route for chemotherapeutical needs. From a comparison with the binding parameters measured previously for cisplatin by other methods, conclusions were drawn about the validity of CE as a simple and convenient method for assaying protein-drug reactions with slow kinetics.